Wave Breaker -Speaker Back Wave Break Up Kit


 

$32.00

824500
+

Wave breaker can be used to treat standing wave or back wave in every speaker in your car, truck, boat, rv, office and home. Wave breaker is a synthetic large cell foam placed directly behind the speaker magnet will eliminate standing wave/back wave from that speaker. How is standing wave created? Every speaker creates this wave - when the speaker cone moves in and out waves are created in two directions.

The wave that moves out the front is called music. The wave that moves out the back of the speaker is called distortion. This back wave reflects off the solid surface behind the speaker and bounces back to the front essentially throwing the speaker out of phase. When HushMat is placed behind the speaker these back waves are absorbed and broken up in the wave breaker molecular structure. This prevents the bounce back and therefore prevents the distortion. Therefore you get all the music you paid for out of that speaker.

Simple to use - cuts with scissors and just peel and stick. HushMat's incredible adhesive technology makes this product a very simple install.

HushMat is the only OEM specified and approved sound deadening & thermal insulating material available to the automotive aftermarket.

Features and Benefits

Reduce Heat & Road Noise all from one USA Made product!!
HushMat ULTRA - Butyl Damping Pads “RATED #1 INSULATOR” by Restorer Magazine

  • Reduces road noise & vibration - low frequency noise from 0 to 1,000 Hz
  • Reduce heat Reduces thermal transfer by over 40% 
  • Stay warmer in the winter & cooler in the summer Insulates from -30 degrees up to 550+ degrees Fahrenheit
  • Light weight & super flexible less than 1/8” thick and 0.47 pounds per square foot
  • Adhesion is guaranteed - No alcohol or acetone wash needed; no installation tools required
  • Trims easily with standard razor knife or household scissors
  • Self-Adhesive peel and stick – no glue required
  • Installs in 1/2 the time versus other brands
  • Manufactured in the United States of America  
  • Outperforms closest competitive brand by over 40%
  • Original Equipment Manufacturer approved - Meets or exceeds automotive damping specs GMO149M - General Motors, WSB-M5G58-A1 - Ford and MS-CD 629 Type C – Chrysler
  • Increased sound in stock Dodge pick up by over 7.9 Db @ 100 Hz published by D-Sport magazine.
  • Universal application  - Apply to Firewall, Floor Pan, Tunnel, Doors, Roof, Rear Wheel Wells, Trunk and Quarter Panels
  • Available in custom vehicle kits – search by make, model & year for your vehicle

HushMat Ultra

FEATURES & BENEFITS:

  • HushMat Ultra effectively treats low frequency, resonant noise from 0 to 1,000 Hz
  • Withstands ambient temperatures from -30 degrees up to +550 degrees Fahrenheit
  • Requires no surface cleaning / preparation or heat guns to install
  • No alcohol or acetone wash needed
  • No installation tools required
  • Trims with standard razor knife or household scissors
  • Self Adhesive peel and stick – no secondary glue - adhesion guaranteed
  • Available in Silver or Black Foil
  • Meets or exceeds damping specs GMO149M - General Motors, WSB-M5G58-A1 - Ford and MS-CD 629 Type C - Chrysler

Easier Installation + Better performance  = GREAT VALUE!

PRODUCT DETAILS:

HUSHMAT ULTRA is a pressure-sensitive, constrained-layer damper, which has excellent adhesion to many difficult to bond substrates such as oily cold rolled steel, automotive E-coat, primers and finishes, and many plastics including polypropylene.  The aluminum foil constraining layer and specially formulated viscoelastic polymer layer combine to give effective vibration damping over a wide temperature range. Ultra is provided in rectangular or square sheets and can be hand-cut for special configurations. 

HUSHMAT ULTRA is temperature resistant and will maintain adhesion through all automotive bake cycles including 288°C (550 degrees F) over-bake conditions. This allows its application at any stage of the production cycle. It can be applied to both pre-painted and top-coated metal surfaces. It is compatible with automotive coatings and will not contaminate spray operations.  HUSHMAT ULTRA superior adhesion characteristics provide excellent corrosion resistance.

The superior adhesive properties of HUSHMAT ULTRA allow it to be used in horizontal, vertical or inverted applications. It has good conformability and can be applied on complex shapes.

HUSHMAT ULTRA is approved for many automotive specifications.  Contact your Hushmat representative for details, and for design and custom application assistance.

TYPICAL PROPERTIES:

COLOR: Polymer - Black
Backing – Aluminum Silver or Black
SPECIFIC GRAVITY: 1.47 (approx. 0.47 pounds per square foot)
THICKNESS: 1.5mm
HARDNESS: 6.5 - 9.0mm.  ASTM D-5
R VALUE: 18
SHELF LIFE: At least 6 months when stored at 40°C or less
TEMPERATURE
RESISTANCE:
HUSHMAT ULTRA will withstand a bake of 1 hour at 240°C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
COLD FLEXIBILITY: Can be bent around 25mm. mandrel at -30°C with no cracking or loss of adhesion.
FLAMMABILITY: Tested per FMVSS 302, HUSHMAT ULTRA is self-extinguishing and meets all aspects of the standard.
SAFETY: HUSHMAT ULTRA is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
PEEL STRENGTH: Tested in 90° peel at a crosshead speed of 300mm per minute on a 25mm wide test specimen. Average load in Newtons is reported.

PEEL STRENGTH
(N per 25mm width)
  OILY COLD OILY GALVANIZED E-COAT
SUBSTRATE ROLLED STEEL* STEEL* (ED-11)**
After 2 Hours 92 92 77
 
Heat Aged
2 Weeks at 70 Celsius
91 91 84
 
Salt Spray
2 Weeks
83 56 72
 
Humidity
2 Weeks at 100% and 38 Celsius
89 84 88
 
Environmental Cycle
5 Cycles of the following
17 Hours at -30 Celsius
72 Hours at 70 Celsius
24 Hours in Salt Spray
7 Hours at -30 Celsius
17 Hours in Salt Spray
7 Hours at 70 Celsius
24 Hours in Salt Spray
89 91 78
 
* Baked per automotive paint bake schedule - e-coat.
** Unbaked

HushMat FAQs

Click on the questions below to reveal the answers

Is there a difference of performance between black Ultra & silver Ultra?

I have a [make/mode/year] vehicle. What do I need to buy to outfit the interior?

We own a motorhome and would like to reduce road noise and tire noise while traveling on rough roads. Do you have a product for this?

I am looking for maximum quietness in my vehicle. Which product and how much would you recommend?

Can I get a sample of the product before committing to buying?

Will the Silencer Megabond foam stand up to direct firewall heat?

I’m planning on buying HushMat but I don’t want to install it myself. Who do you recommend?

I want to quiet down my dishwasher/washing machine, etc. Can I use your product to do this?

Do you have something to put under the hood? I have a custom paint job and I want to protect it from heat.

Will HushMat Ultra smell when it gets hot?

What do I need to do to prep the surface for application of HushMat products?

How much of my vehicle to I need to cover in HushMat Ultra to optimally reduce Heat?

How do I become a dealer of HushMat?

What is HushMat made of?

What kind of adhesive does HushMat use on its damping material?

How much time do I have to reposition HushMat Ultra when installing it?

What is vibration damping or also sometimes referred to as “dampening”?

What is HushMat?

What is a dB?

How can I treat high temperature "hot spots" on my car?

Where do I apply HushMat Silencer foam?

My License Plate rattles from the heavy bass from my sub-woofer. What can I do?

What sound reduction can I expect from a HushMat installation?